Filter
Top Products
TROUBLESHOOTING AND MAINTENANCE
80
2
Gently remove the misfed paper
from under the fusing unit as shown
in the illustration. If the paper cannot
be removed, proceed to "C: Misfeed
in the transport area".
3
Raise the fusing unit release lever and then close the side
cover by pressing the round projections near the side cover
open button. The error indicator will go out and the ready
indicator will light up.
C: Misfeed in the transport area
1
Lower the fusing unit release lever.
See "B: Misfeed in the fusing area" (p.79).
2
Open the front cover.
To open the front cover, see "INSTALLING THE TD (TONER/
DEVELOPER) CARTRIDGE" (p.14).
3
Rotate the roller rotating
knob in the direction of the
arrow and gently remove the
misfed paper from the exit
area.
The fusing unit is hot. Do not touch the fusing unit when
removing misfed paper. Doing so may cause a burn or other
injury.
• Do not touch the surface (green portion) of the drum cartridge when
removing the misfed paper. Doing so may damage the drum and
cause smudges on copies.
• Do not remove the misfed paper from above the fusing unit. Unfixed
toner on the paper may stain the paper transport area, resulting in
smudges on copies.
Warning
Caution
Roller rotating
knob
!AL-2050CS.book 80 ページ ２００８年１月７日 月曜日 午後８時１０分