Filter
Top Products
4
Trouble?
22
USING OTHER INSTALLED DRIVERS
If you use another GDI printer or Windows Printing Systems printer, interference between printers
may occur and printing may not be performed properly.
To use another GDI printer or a Windows Printing System printer, you must change the port
setting of the printer driver using the following procedure.
If another printer does not operate properly when the AL-841 printer driver is
set to “FILE”, uninstall the AL-841 printer driver.
To uninstall the driver, see UNINSTALLING DRIVERS on page 23.
If after uninstalling the AL-841 printer driver, the printer still does not operate
properly, reinstall the printer driver you are using.
Windows 95/Windows 98/Windows NT 4.0:
1
Click the Start button.
2
Select Settings and then click Printers.
3
Right-click the AL-841 icon in the printer dialog box and then click Properties.
For this description, it is assumed that the mouse is configured for right hand
operation.
4
Click the Details tab (Ports tab – on Windows NT4.0) in the Properties dialog box,
select FILE: in the Print to the following port list box, and click the OK button.
5
Right-click the icon of the printer to be used and click Properties.
6
Click the Details tab (Ports tab – on Windows NT4.0) in the Properties window, select
LPT1 (or the currently used port), and click the OK button.
To use the AL-841 again, perform the same procedure but select the port to be
used (for example, LPT1) in step 4.