Filter
Top Products
8-5
CHAPTER8
KEY OPERATOR PROGRAMS
Category Program Name Function Page No.
Date Format Sets the initial date format. 8-18
Setting
Date and Time Adjusts the date and time. 8-19
Adjustment
Rotation Copy Enables/disables rotation of original images. 8-19
Setting
Size Setting for Sets a paper size in each tray with [EXTRA] setting. 8-20
[EXTRA]
Timer Settings Auto Power Sets a time interval after which the copier 8-21
Shut-off Timer automatically turns off.
Auto Clear Setting Sets a time interval after which the copier returns 8-21
to the initial settings.
Preheat Mode Sets the time that elapses before the copier enters 8-22
Setting the preheat mode after copying is completed.
Noise Level Reduce Sets the time that elapses before the copier enters the 8-22
Mode noise level reduce mode after copying is completed.
Message Time Sets the length of time that messages are displayed. 8-23
Setting
Enable/Disable Disabling of Auto Prevents automatic paper selection. 8-24
Settings Paper Selection
Disabling of Auto Prevents automatic switching between the paper 8-24
Tray Switching trays.
Disabling of Prohibits the use of the bypass tray during 8-24
Bypass-Tray duplex copying.
in Duplex Copy
Disabling Prevents stored programs from being replaced or 8-25
Deletion of Job deleted.
Programs
Disabling of Prevents the use of the document feeder when it 8-25
Document Feeder malfunctions.
Disabling of Duplex Temporarily prevents the duplex system from 8-25
Copying operating when it malfunctions. Allows the use of the
copier but not the duplex system.
KEY OPERATOR’S GUIDE
Key operator programs