Filter
Top Products
40
5
Chapter 5
TROUBLESHOOTING
This chapter describes troubleshooting and misfeed removal.
TROUBLESHOOTING
If you experience difficulty using the machine, check the following troubleshooting guide before calling for service.
Many problems can be easily resolved by the user. If you are unable to solve the problem using the troubleshooting
guide, turn off the power switch and unplug the machine, and contact your SHARP service center.
MACHINE/COPYING PROBLEMS
The machine does not operate. ................................................................................................................. 41
Copies are too dark or too light.................................................................................................................. 41
Blank copies............................................................................................................................................... 41
Part of the image is cut off or there is too much blank space. ................................................................... 41
Wrinkles appear in the paper or the image disappears in places. ............................................................. 41
Paper misfeed............................................................................................................................................ 42
Original size not selected automatically..................................................................................................... 42
Copies are smudged or dirty...................................................................................................................... 43
White or black lines appear on copies. ...................................................................................................... 43
Paper size for a paper tray cannot be set. ................................................................................................. 43
A copy job stops before it is finished.......................................................................................................... 43
The POWER SAVE indicator is lit.............................................................................................................. 43
Any one of the alarm indicators (
,
,,,
) is lit or blinking. .................................................. 43
Lighting fixture flickers. .............................................................................................................................. 43
PRINTING PROBLEMS
The machine does not print. (ON LINE indicator does not blink.).............................................................. 44
The machine does not print. (ON LINE indicator was blinking.) ................................................................ 44
Printing is slow. .......................................................................................................................................... 45
The printed image is light and uneven. ...................................................................................................... 45
The printed image is dirty........................................................................................................................... 45
The printed image is skewed or it runs off the paper. ................................................................................ 45
Any one of the alarm indicators (
,
,,,
) is lit or blinking. .................................................. 45
Removing the software .............................................................................................................................. 45
INDICATORS AND DISPLAY MESSAGES.................................................. 46
MISFEED REMOVAL .................................................................................... 47
REPLACING THE TD CARTRIDGE ............................................................. 53
REPLACING THE DRUM CARTRIDGE ....................................................... 54
AR-5316-5320-EX.book 40 ページ ２００５年４月８日 金曜日 午前９時３５分