Filter
Top Products
4-7
4
Misfeed in the duplex module
1
Pull out the duplex module.
Hold the knob and gently
open the module.
2
Raise the exit tray and open the cover of
the duplex module.
If the duplex module is not
equipped with an exit tray,
the operation concerning
the exit tray is not needed
(steps 2 to 4).
3
While holding the exit tray up, remove the
misfed paper.
●
If paper is misfed at the upper part of the duplex
module:
Gently remove the misfed
paper taking care not to
tear the paper.
●
If paper is misfed at the lower part of the duplex
module:
Gently remove the misfed
paper taking care not to
tear the paper.
4
Close the cover of the duplex module and
return the exit tray.
5
Gently close the duplex module.
After closing the duplex
module, confirm that the
misfeed message is
cleared and that the
normal display appears.
■ Misfeed in the bypass tray
1
Remove the misfed from the bypass tray.
Be careful not to tear the
misfed paper during
removal.
2
Open and close the duplex module to clear
the misfeed message.
MISFEED REMOVAL