Filter
Top Products
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
Parts marked with “ “ are important for maintaining the safety of the set.
Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
LASER PRINTER
AR-M350U/M450U
MODEL
AR-M350N/M450N
OPTIONS AR-P14
CODE : 00ZARM350UA1E
[1] INTRODUCTION
The AR-M350U/M450U and AR-M350N/M450N are minor change models based on the AR-M350/M450.
This service manual only provides information on these minor changes.
In addition to this service manual, the documents listed below are required to properly maintain these machines.
Note:Depending on the option, additional service documentation may be required.
[2] LIST OF DIFFERENCES FROM AR-M350/M450
A.Product composition
*1: Installation of the AR-P14 on the AR-M350U/M450U will provide similar functionality to that of the AR-M350/M450.
•AR-M350/M450 Service Manual : 00ZARM350/A1E Parts Guide : 00ZARM450/P1E Circuit Diagram : 00ZARM350/C1/
•AR-P350/P450 Service Manual : 00ZARP350/A2E Parts Guide : 00ZAR350LPP1/ Circuit Diagram : 00ZARP350/C1/
•AR-NC5J Service Manual : 00ZARNC5J/A1E
Model Name Printer Option Model NIC Standard Model Note
Base Engine AR-M350U
AR-M450U
AR-M350N
AR-M450N
Print Speed 35ppm
45ppm
35ppm
45ppm
Multi Function Controller AR-M11 Not Available Standard
Multi Function Controller(for U-Model) Not Available Standard Not Available Not registered as a product
Print Server Card AR-NC5J Not Available Standard
Printer Extension Kit AR-P14 Option Not Available *1