Filter
Top Products
AR-M350U SPECIFICATIONS 4-3
e. Font
f. Others
* 1 In the models without a hard disk drive, an optional hard disk drive
must be installed .
* 2 Functions when peripheral devices are installed.
* 3 Not supported in the Windows NT 4.0 environment.
* 4 2/4/6/9/16 is supported in the Windows 2000 environment.
* 5 Only one size is supported in the Windows 2000 environment.
* 6 Only 35 fonts are supported in the Windows NT 4.0 environment.
* 7 This function is limited for PPD.
* 8 PCL6 only
(5) Compatibility
B. Expanded RAM
Installation of an expanded RAM will avoid the following status.
1) Time out error reduction
2) Spool time reduction
3) Avoidance of VM error / memory full
Use commercially available RAM with the following specifications.
Note: If RAM used does not meet the follow specifications, the copier
may not recognize the additional RAM or its capacity correctly.
<Spesification>
<Operation-assured Memory> (As of March / 2001)
C. Scanner function
*Scanner function, the NIC card and Network Scanner kit are required.
(1) Scanner function
(2) Support System
(3) Support Image
(4) Transmission Mode
When an optional PS3 expansion kit is
installed
Function PCL5e/
PCL6
PS PPD
(Windows)
PPD
(Macintosh)
Resident font 45 fonts 136 fonts 136
fonts*6
35 fonts
Download font Bitmap
TrueType,
Graphic
Bitmap
Type1
TrueType
Bitmap
Type1
TrueType
N/A
When an optional PS3 expansion kit is
installed
Function PCL5e/
PCL6
PS PPD
(Windows)
PPD
(Macintosh)
Watermark*7 Yes Yes Yes Yes
Overlay Yes Yes N/A N/A
Job retention*1 Yes Yes N/A Yes
Account control Yes Yes N/A Yes
Custom settings Yes Yes N/A N/A
Automatic
configuration*2
Yes Yes N/A Yes
Job end
notification
Ye s Ye s N / A N / A
PCL 5e
compatibility
Target for PCL5e is to be compatible with HP LaserJet
4000.
Small margin difference, rendering difference by
different font family, default and transfer function
difference are not to be included in the compatibility.
All the PJL commands are not necessarily included in
the compatibility.
PCL6
compatibility
Target for PCL6 is to be compatible with HP LaserJet
4000.
Small margin difference, rendering difference by
different font family, default and transfer function
difference are not to be included in the compatibility.
All the PJL commands are not necessarily included in
the compatibility.
PostScript
Compatibility
Roman PostScript is targeted to be compatible with
Adobe PostScript as performed in HP LaserJet 4000.
Small margin difference, rendering difference by
different font family, default and transfer function
difference are not to be included in the compatibility.
DIMM TYPE 168pin 3.3V Unbuffered SDRAM DIMM Non-ECC
DIMM capacity 64MByte, 128MByte, 256MByte
CAS LATENCY CL=2
SDRAM CLOCK For PC100, PC133
SPD Supporting
Parity Not support
ECC Not support
Manufacture Capacity Model name RAM CHIP name Note
Kingston
Technology
128MB KVR133X64C3/
128
HYB39S64800BT
-7.5
128MB KVR133X64C3
-128
D456821G-A75
-9JF
256MB KVR133X64C3
-256
HY57V28820AT-H
Viking
Compornents
64MB VIK8641CL2 µPD456841G5
-A80-9JF
64MB VIK8641CL2 D456841G5-A80
-9JF
128MB VIK6642CL2 TC59SM708FT-80
128MB VIK6642CL2 D4564841G5-A80
-9JF
256MB VIK2642CL2 TC59SM708FT-80
Memory Card
Technology
64MB DM864VS65804X
-7G
GM72V66841XT75
128MB DM1665VS65804
X-7G
HY57V64820HG
Scanner mode Scan to E-mail (Internet FAX)
Scan to Server (Client PC)
Embedded server SMTP server
FTP server
Protocol TCP/IP
Format TIFF, PDF, TIFF-F
* Selectable for each page
Compression method Uncompressed, G3(1-dimension) *1, G4 *2
*1 G3 (1-dimension) = MH (Modified Huffman)
*2 G4 = MMR (Modified MR)
DSPF/OC
transmission switching
Available
(Switching during the reading is not feasible)