Filter
Top Products
5-24
SADDLE STITCH FINISHER
Misfeed in the saddle stitch finisher
If a misfeed has occurred in the saddle stitch finisher during printing, remove the misfed paper following the procedure
below.
1
Pull the knob and slide the saddle stitch
finisher away from the main unit.
2
Remove the misfed paper from the main
unit.
3
If misfed paper is not found in step 1, open
the top cover.
4
Turn roller rotating knob B until the triangle
mark reaches the position indicated in the
illustration (only if a punch module is
installed as a peripheral unit).
5
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
6
Close the top cover.
7
Open the front cover.
8
Turn roller rotating knob C until a blue
indication is seen (when the stapling
function has been used).
9
Remove the misfed paper from the stapler
compiler (when the stapling function has
been used).
Be careful not to tear the
misfed paper during
removal.
10
Open the saddle stitch section cover (when
the saddle stitch function has been used).
Roller rotating
knob B
Blue
Roller rotating
knob B