Filter
Top Products
Connections
23
Connecting to Video Equipment
Before connecting, ensure that the power cord of the projector is unplugged from the AC
outlet and turn off the devices to be connected. After making all connections, turn on the
projector first and then the other devices.
The projector is equipped with input terminals that support component, S-video, and video signals.
See the illustration below to connect with the audio-visual equipment.
The image quality is highest in the order of the component signal, the S-video signal and the video
signal. If your audio-visual equipment has a component output terminal, use the COMPUTER/
COMPONENT terminal (INPUT1 or INPUT 2) on the projector for video connection.
When connecting to equipment with component output terminal (INPUT1 or
INPUT2)
Component cable
(commercially
available)
To AUDIO (INPUT1, 2)
terminal
To audio output
terminal
ø3.5 mm minijack to RCA
audio cable* (commercially
available)
To component output
(Y, CB/PB, CR/PR) terminal
To INPUT1 terminal
DVD, etc.
*Use the cable when you want to
enjoy the sound from the projector’s
speaker.
3 RCA to 15-pin
D-sub adaptor
Supplied
accessory
3 RCA to 15-
pin D-sub
adaptor
DT-100_EN_f 05.7.22, 5:51 AM23