Sharp ER-A347 Cash Register User Manual


 
1
INTRODUCTION
Thank you very much for your purchase of the SHARP Electronic Cash Register, Model ER-A347/ER-A347A.
Please read this manual carefully before operating your register in order to gain full understanding of
functions and features.
Please keep this manual for future reference. It will help you if you encounter any operational problems.
IMPORTANT
• Be careful when removing and replacing the printer cover, as the cutter mounted on it is sharp.
• Install the cash register in a location not subject to direct sunlight, unusual temperature changes, high
humidity or splashing water.
Installation in such locations could cause damage to the cabinet and the electronic components.
• Never install the register in saline areas (e.g.: close to the sea).
Installing the register in such locations could cause component failure with the corrosion.
• Never operate the register with wet hands.
The water could seep into the interior of the register and cause component failure.
• When cleaning your register, use a dry, soft cloth. Never use solvents, such as benzine and/or thinner.
The use of such chemicals will lead to discoloration or deterioration of the cabinet.
• The register plugs into any standard wall outlet (120V AC).
Other electrical devices on the same electrical circuit could cause the register to malfunction.
• If the register malfunctions, call your local authorized dealer for service.
Do not try to repair the register yourself.
• For complete electrical disconnection, disconnect the main plug.
PRECAUTION
This register has a built-in memory protection circuit which is operated by rechargeable batteries.
Please note that all batteries will, in time, dissipate their charge even if not used. Therefore to insure an
adequate initial charge in the protection circuit, and to prevent any possible loss of memory upon installation,
it is recommended that each unit be allowed to be recharged for a period of 24 to 48 hours prior to use.
Also note that if the rechargeable batteries have been discharged completely, your cash register will be
automatically initialized when you turn on the power.
In order to charge the batteries, the machine must be plugged in. This recharging precaution can prevent
unnecessary initial service calls.
BATTERY DISPOSAL
This product contains Nickel Metal Hydride Battery. Must be Disposed of
Properly. Contact Local Environmental Officials for Disposal Instructions.
This product utilizes tin-lead solder, and fluorescent lamp containing a
small amount of mercury.
Disposal of these materials may be regulated due to environmental
considerations.
For disposal or recycling information, please contact your local authorities,
the Electronics Industries Alliance: www.eiae.org, the lamp recycling
organization: www. lamprecycle. org or Sharp at 1-800-BE-SHARP
(For U.S.A only)
SD logo is a trademark of SD-3C, LLC.
English