Sharp FO-4650 Fax Machine User Manual


 
Programming Auto-Dial Numbers
44
7
Enter the name of the party by
pressing the letter entry keys
(max.of 20 characters). (Make sure
the Rapid Key overlay is flipped
down.)
If you don’t want to enter a name,
go directly to Step 8.
8
Press the START key.
Example: SHARP
9
Press 1 if the number programmed is
an area code or access code to be used
for Chain Dialing (see Chain Dialing
at the end of this procedure). Press 2
(or START) if the number is a regular
fax number.
If you pressed 1 or are
programming a Speed Dial number,
go to Step 14. (Note: A backup fax
number cannot be entered in a
Rapid Key used for Chain Dialing.)
SET CANCEL
or
10
Enter a backup fax number to be
dialed if the first number is busy.
(If you don’t want to enter a backup
number, go directly to Step 13.)
(Example)
11
Press the START key.
A
S
H
R
P
1
2
3
2
1
4 4
1 1
START
START
all-FO4700.book Page 44 Tuesday, November 28, 2000 2:07 PM