Filter
Top Products
Programming Auto-Dial Numbers
45
2. Sending
Documents
12
Enter a name for the backup fax
number. (If you don’t want to
enter a name, go directly to
Step 13.)
Example: SHARP2
13
Press the START key.
14
Return to Step 4 to program another
number, or press the STOP key
repeatedly to return to the date and
time display.
• If you programmed a Rapid Key
number, you can write the name of
the party on the label above the
Rapid Key.
Step 4 or
Chain Dialing for area and access codes
You can also program an area code or access code in a Rapid Key or
Speed Dial number using the above programming procedure. In Step
9, press 1 to set the number as a Chain Dialing number.
After you dial an area code or access code using a Rapid Key or Speed
Dial number set for Chain Dialing, the fax machine will wait for you
to dial the remainder of the number (you can dial the remainder of the
number by pressing a Rapid Key, by pressing the Speed Dial key and
entering a Speed Dial number, or by pressing numeric keys). Note that
the remainder of the number should not be set as a Chain Dial number
if programmed in a Rapid Key or Speed Dial number.
♦ The maximum number of digits that can be dialed at one time by
Chain Dialing is 50.
A
S
H
R
P
2
START
STOP
bosd1.fm Page 45 Monday, December 4, 2000 3:03 PM