Sharp FO-4700 All in One Printer User Manual


 
Connections
14
Connections
Points to keep in mind when setting up
Do not place the machine in direct sunlight.
Do not place the machine near heaters or air conditioners.
Keep dust away from the machine.
Install the machine on a level surface.
Connecting the power cord
Connect the female end of the power cord to the fax machine as
shown. Insert the male end into a 120 V, 60 Hz, grounded (3-prong)
AC outlet.
Note:
If your area experiences a high incidence of lightning or power
surges, we recommend that you install surge protectors for the power and
telephone lines. Surge protectors can be purchased at most telephone spe-
cialty stores.
Press the power
switch to turn on
the power.
all-FO4700.book Page 14 Friday, June 11, 1999 1:57 PM