Sharp LL-T1815 Computer Monitor User Manual


 
29
EnglishDeutschFrançaisItalianoEspañolEnglish
Specifications
The analog RGB input connector pin
(Mini D-sub connector with 15 pins)
5 1234
10
6789
15 11121314
No. Function
1 Red video signal input
2 Green video signal input
3 Blue video signal input
4 GND
5 GND
6 For red video signal GND
7 For green video signal GND
8 For blue video signal GND
9 DDC+5V
10 N.C.
11 GND
12 DDC data
13 For Hsync signal input
14 For Vsync signal input
15 DDC clock
The DVI-I input connector pin
(DVI-I connector with 29 pins)
1 765432 8
9
151413121110 16
17 23
22
21201918 24
C1
C2
C3
C4
C5
No. Function No. Function
1 TMDS data 2- 16 Hot plug detection
2 TMDS data 2+ 17 TMDS data 0-
3 TMDS data 2/4 shield 18 TMDS data 0+
4 N.C. 19 TMDS data 0/5 shield
5 N.C. 20 N.C.
6 DDC clock 21 N.C.
7 DDC data 22 TMDS clock shield
8 23 TMDS clock +
9 TMDS data 1- 24 TMDS clock -
10 TMDS data 1+ C1
Analogue red image signal
11 TMDS data 1/3 shield C2
Analogue green image signal
12 N.C. C3
Analogue blue image signal
13 N.C. C4
14 +5V C5 Analogue GND
15 GND
Analog vertically
synchronised signal
Analogue horizontally
synchronised signal
Power management
The monitor is based on the VESA DPMS and the
DVI DMPM standards.
To activate the monitor's Power Management
function, both the video card and the computer
must conform to the VESA DPMS standard and the
DVI DMPM standard.
DPMS: Display Power Management Signalling
*With no audio input
DMPM: Digital Monitor Power Management
*With no audio input
DPMS mode Screen Power H-sync V-sync
consumption
ON Display on 51W* Yes Yes
STANDBY No Yes
SUSPEND Display off 5W Yes No
OFF No No
DMPM mode Screen Power
consumption
ON Display on 51W*
OFF Display off 5W
DDC (Plug & Play)
This monitor supports the VESA DDC (Display
Data Channel) standard.
DDC is a signal standard for carrying out Plug &
Play functions on the monitor or PC. It transfers
information such as degree of resolution between
the monitor and PC. You can use this function if
your PC is DDC compliant and if it is set so that it
can detect the Plug & Play monitor.
There are many varieties of DDC due to the
differences between systems. This monitor works
with DDC2B.