Filter
Top Products
9
SPECIFICATIONS
Machine specifications / copier specifications (Continued)
* Type A connectors are located on the front of the machine and on the right side of the machine at the back (total of two connectors);
however, the connectors cannot be used simultaneously. Only one of the connectors can be used. If you need to change the
connector that is used, contact your service technician.
To receive power supplied from a type A connector, the total current consumption of the connected device should not exceed
500 mA.
Bypass tray
Paper sizes: A3W, A3, B4, A4, A4R, B5, B5R, A5R, envelopes, 12" x 18", 11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR (Includes automatic paper size
detection function. Entry of paper sizes up to 297 mm x 432 mm (11-5/8" x 17") is
possible.)
Paper weights:
Thin paper (55 g/m
2
to 59 g/m
2
(15 lbs. to 16 lbs.)), plain paper (60 g/m
2
to 105 g/m
2
(16 lbs. to
28 lbs.)), heavy paper (106 g/m
2
to 256 g/m
2
(28 lbs. bond to 140 lbs. index)),
envelopes (75 g/m
2
to 90 g/m
2
(20 lbs. to 24 lbs.))
Paper capacity: Standard paper 100 sheets
Paper types:
SHARP-recommended plain paper, recycled paper, coloured paper, heavy paper, thin paper,
transparency film, envelopes (Monarch, Com-10, DL, C5)
Duplex module
Paper sizes: A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR
Paper weight: Plain paper (60 g/m
2
to 105 g/m
2
(16 lbs. to 28 lbs.)), heavy paper (106 g/m
2
to
209 g/m
2
(28 lbs. bond to 110 lbs. index))
Paper types: SHARP-recommended plain paper, recycled paper, coloured paper, and heavy paper
Output tray (Center tray)
Output method: Face-down output (A3W and 12" x 18" paper can be output to right tray, or finisher)
Output capacity: 500 sheets (using SHARP-recommended A4 or 8-1/2" x 11" paper)
(The maximum number of sheets that can be held varies depending on ambient conditions in the
installation location, the type of paper, and the storage conditions of the paper.)
Tray full sensor:Yes
Interface port
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity:
Type A connector supports USB 2.0*
Compatibility requirements of USB memory
Memory capacity: Max. 32 GB
Disk Format : FAT32 only
Type B connector supports USB 2.0 (Hi speed)
Required power supply
Local voltage ±10% (For the power supply requirements, see the name plate in the lower corner of
the left side of the machine.)
Power consumption
220-240V: 1.84 kW / 100-127V: 1.44 kW
Dimensions
620 mm (W) x 670 mm (D) x 950 mm (H) (24-13/32" (W) x 26-3/8" (D) x 37-25/64" (H))
Weight
Approx. 116 k
g
(255.8 lbs.)
Overall dimensions
970 mm (W) x 670 mm (D) (38-3/16" (W) x 26-3/8" (D)) (when bypass tray is extended)