Filter
Top Products
46
Sharpdesk CD-ROM (for Windows)
Installing the Software Program
Note the following when installing the software program from the CD-ROM:
●
Be sure to check the system requirements for installation of each of the software programs in the user's guides and on
the Information screen during installation.
●
The user's guides give detailed instructions for installing and setting up the programs. Be sure to read the user's guides
before installing the programs. In particular, if you are going to use Network Scanner Tool, be sure to carefully read the
instructions regarding network preparation and setup procedures before installing the program. The network
administrator should verify that network preparation has been carried out correctly.
●
If you are going to send an original scanned with the Digital Laser Copier/Printer to a computer (Scan to Desktop),
Network Scanner Tool must be installed.
●
If you perform a standard installation of Sharpdesk (select "Typical" in the Setup Type selection screen), Network
Scanner Tool will be also be installed, alternatively you can also select "Custom" installation and install only Network
Scanner Tool.
●
If Internet Explorer 6.0 or later is not installed on your computer, see the installation procedure for Internet Explorer in
the Readme file (Readme.txt) in the root folder of the "Disc 2" CD-ROM.
●
If you intend to install SHARP TWAIN AR/DM, install Network Scanner Tool first. SHARP TWAIN AR/DM cannot be
installed alone.
●
The contents of the Information screens that appear during installation can also be found in the ReadMe files on the
same CD-ROM. The ReadMe file for Sharpdesk is located in the root folder of the CD-ROM, and the ReadMe file for
SHARP TWAIN AR/DM is located in the Twain folder.
Installing Sharpdesk and Network Scanner Tool
1
Quit any software applications and/or resident programs that are running on your
computer.
2
Insert the "Disc 1" CD-ROM into your CD-ROM drive.
●
The Sharpdesk installation screen appears. Proceed to step 5.
●
If the screen does not appear, proceed to step 3.
3
Click the "Start" button ( ) and then click "Computer".
●
In Windows XP, click the "start" button and then click "My Computer".
●
In Windows 98/Me/2000, double click "My Computer".
4
Double click the CD-ROM icon ( ).
●
The Sharpdesk installer starts.
5
Follow the instructions on the screen.
●
In Windows Vista, if a message screen appears asking you for confirmation, click "Allow".