Filter
Top Products
153
9
Press the [COLOUR START] key
( ) or the [BLACK & WHITE
START] key ( ).
One set of copies is printed again using the adjusted settings.
The number of sets does not change at this time.
If settings must be adjusted again, repeat steps 6 through 9
until there are no problems.
When you are ready to print the remaining sets, go to the next
step.
10
Touch the [End] key.
You will return to the base screen of copy mode and the
remaining sets will be printed.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
If proof copy is performed when the machine is already printing a copy job or other job, the job in progress will stop
temporarily and the set of proof copies will be printed. The previous job will resume after the proof copies are printed.
When the [End] key is touched, printing of the remaining sets will start after the copy job in progress is completed.
or
Press [End] to continue.
To make a proof copy again, press
[Start].
Change End