Sharp MX-C300PL Printer User Manual


 
15
BEFORE USING THE MACHINE
Paper that cannot be used
Special media for inkjet printers (fine paper, glossy
paper, glossy film, etc.)
Carbon paper or thermal paper
Pasted paper
Paper with clips
Paper with fold marks
Torn paper
Oil-feed transparency film
Thin paper less than 13 lbs. (55 g/m
2
)
Paper that is 80 lbs. index (220 g/m
2
) or heavier
Irregularly shaped paper
Stapled paper
Damp paper
Curled paper
Paper on which either the print side or the reverse
side has been printed on by another printer or
multifunction device.
Paper with a wave-like pattern due to moisture
absorption
Non-recommended paper
Iron-on transfer paper
Japanese paper
Perforated paper
Paper that can be used for automatic 2-sided printing
Paper used for automatic duplex printing must meet the following conditions.
Paper type: Plain paper (special paper cannot be used.)
Paper size: Standard sizes (8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", A4, B5, A5, 16K)
Paper weight: 16 lbs. to 28 lbs. (60 g/m
2
to 105 g/m
2
)
Special papers
Follow these guidelines when using special papers.
Use SHARP recommended transparency film and label sheets. Using other than SHARP recommended paper
may result in misfeeds or smudges on the output. If other than SHARP recommended media must be used, feed
each sheet one at a time using the bypass tray (do not attempt continuous printing).
There are many varieties of special paper available on the market, and some cannot be used with this machine.
Before using special paper, contact your SHARP Service Department.
Before using other than SHARP recommended paper, make a test print to see if the paper is suitable.
Various types of plain paper and special media are sold. Some types cannot be used with the machine. Contact
your dealer or nearest SHARP Service Department for advice on using these types of paper.
The image quality and toner fusibility of paper may change due to ambient conditions, operating conditions, and
paper characteristics, resulting in image quality inferior to that of SHARP standard paper. Contact your dealer or
nearest SHARP Service Department for advice on using these types of paper.
The use of non-recommended or prohibited paper may result in skewed feeding, misfeeds, poor toner fusing
(the toner does not adhere to the paper well and can be rubbed off), or machine failure.
The use of non-recommended paper may result in misfeeds or poor image quality. Before using
non-recommended paper, check if printing can be performed properly.
Note