Sharp MX-C300PL Printer User Manual


 
18
BEFORE USING THE MACHINE
Important points when inserting paper in the bypass tray
Up to 50 sheets of standard paper can be set in the bypass tray.
Be sure to place 5-1/2" x 8-1/2" or A6, B6 size paper or envelopes horizontally as shown in the following diagram.
To feed an envelope, first press down the fusing unit release levers (2 places) to release the pressure. (p.17)
When loading envelopes, make sure that they are straight and flat and do not have loosely glued construction flaps
(not the closure flap).
Special papers except SHARP recommended transparency film, labels, and envelopes must be fed one sheet at a
time through the bypass tray.
When adding paper, first remove any paper remaining in the tray, combine it with the paper to be added and then
reload as a single stack. The paper to be added must be the same size and type as the paper already in the tray.
Use SHARP-recommended transparency film.
Do not use paper that is smaller than the original. This may cause smudges or unclean images.
Do not use paper that has already been printed on by a laser printer or plain paper fax machine. This may cause
smudges or unclean images.
Important points when using envelopes
Envelopes that cannot be used
Do not use the following envelopes. Envelopes misfeed, and smudges may result.
Envelopes with metal clasps, plastic hooks, or ribbon
hooks
Envelopes closed with string
Envelopes with windows or backing
Envelopes with an uneven front surface due to
embossing
Double-layer envelopes
Envelopes with an adhesive for sealing
Hand-made envelopes
Envelopes with air inside
Envelopes with creases, fold marks, torn or
damaged envelopes
Envelopes with an incorrectly aligned corner gluing
position on the back cannot be used as creasing
may result.
Print quality on envelopes
Print quality is not guaranteed in the area 13/32" (10 mm) around the edges of the envelope.
Print quality is not guaranteed on parts of envelopes where there is a large step-like change of thickness, such as
on four-layer parts or parts less than three layers.
Print quality is not guaranteed on envelopes with adhesive for sealing.
Available
Not
available
Can be used
Cannot be
used