Filter
Top Products
41
Useful
Features
Adjusting the Projected Image
(“SCR - ADJ” Menu)
Resize
Image Shift 0
0
Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Front
English
On
Logo
On
Border
SEL./ADJ. ENTER END
Picture SCR - ADJ PRJ - ADJ Help
8
7
6
5
4
3
2
1
11
11
1 Setting the Resize Mode
• For details of the Resize mode, see pages 30
and 31.
•You can also press RESIZE on the remote con-
trol to set the resize mode. (See page 30.)
Note
22
22
2 Adjusting the Image
Position
You can move the projected image vertically.
Q button
•You cannot set this item when “Resize” is set
to “Normal”.
Note
O button
Menu operation n Page 37
33
33
3 Keystone Correction
When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted
trapezoidally. The function for correcting trap-
ezoidal distortion is called Keystone Correction.
Select “Keystone” on the “SCR-ADJ”
menu and adjust with the slide bar.
See page 28 for details of Keystone Correction.
O buttonQ button
• The Keystone Correction can be adjusted up
to an angle of approximately ±20 degrees
(when “Resize” is set to “Normal”).
•You can also press KEYSTONE on the remote
control or on the projector to adjust Keystone
Correction.
Note