Filter
Top Products
-9
CONTROL CONTENTS COMMAND PARAMETER
RETURN
Power ON
Standby mode
(or 30-second startup time)
Setup Guide On S E G U
___
1 OK or ERR ERR
Off S E G U
___
0 OK or ERR ERR
Internal Speaker On ASPK
___
1 OK or ERR ERR
Off ASPK
___
0 OK or ERR ERR
RGB Frequency Check Horizontal T F R Q
___
1 kHz(***.* or ERR) ERR
Vertical T F R Q
___
2 Hz(***.* or ERR) ERR
Fan Mode Normal H L M D
___
0 OK or ERR ERR
High H L M D
___
1 OK or ERR ERR
Input Search *3 Start I S E S _ _ _ 1 OK or ERR ERR
Video Setup 0 IRE V I S U _ _ _ 0 OK or ERR ERR
7.5 IRE V I S U _ _ _ 1 OK or ERR ERR
Wall Color Off WLCO_ _ _0OK or ERR ERR
Blackboard WLCO_ __1OK or ERR ERR
Whiteboard WLCO_ __ 2OK or ERR ERR
Quick Start Menu On Q S M N _ _ _ 0 OK or ERR ERR
Off Q S M N _ _ _ 1 OK or ERR ERR
COMPUTER2 Select *4 Input R B S E _ _ _ 0 OK or ERR ERR
Monitor Output R B S E _ _ _ 1 OK or ERR ERR
DLP
®
Link
TM
Off 3 D E N _ _ _ 0 OK or ERR ERR
On 3 D E N _ _ _ 1 OK or ERR ERR
DLP
®
Link
TM
Invert 3 D I V _ _ _ 1 OK or ERR ERR
Closed Caption
(For Americas only)
Off C L C A _ _ _ 0 OK or ERR ERR
CC1 C L C A _ _ _ 1 OK or ERR ERR
CC2 C L C A _ _ _ 2 OK or ERR ERR
Reset Network Setting L N R E _ _ _ 1 OK or ERR OK or ERR
Restart Network L R E S _ _ _ 1 OK or ERR OK or ERR
Lamp Timer Reset *5 L P R E 0 0 0 1 ERR OK or ERR
*1 For setting the projector name, send the commands in the order of PJN1, PJN2 and PJN3.
*2 When “COMPUTER2 Select” is set to “Monitor Output”, you may receive an “ERR” response code.
*3 When the next command is sent during input search, you may receive an “ERR” response code, and the
input search is canceled.
*4 When “COMPUTER2” is selected in the INPUT list, “COMPUTER2 Select” cannot be set to “Monitor
Output”.
*5 The Lamp Timer Reset command is available only in standby mode.
RS-232C Specifi cations and Commands