Sharp PN-L802B Computer Monitor User Manual


  Open as PDF
of 28
 
8
E
• Wheninstalling,removingormovingthemonitor,ensurethatthisiscarriedoutbyatleast6people.
• Besuretouseawall-mountbracketdesignedordesignatedformountingthemonitor.
• Thismonitorisdesignedtobeinstalledonaconcretewallorpillar.Reinforcedworkmightbenecessaryforsomematerials
such as plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.
• ToattachaVESA-compliantmountingbracket,useM6screwsthatare5/16inch(8mm)to3/8inch(10mm)longerthanthe
thickness of the mounting bracket.
• Aftermounting,pleasecarefullyensurethemonitorissecure,andnotabletocomeloosefromthewallormount.
• DonotuseanyscrewholesotherthanVESAholesforinstallation.
Mounting Precautions (For SHARP dealers and service engineers)
n
Attaching the Tray
1. Remove the cover from the back of the monitor.
2. Secure the tray mounting bracket.
Secureusing2traymountingscrews(M5long)(supplied)
and1traymountingscrew(M5short)(supplied).
(1)
(2)
(3)
Tray mounting
bracket (supplied)
Tray mounting screws
(M5 long) (supplied)
Cover
Tray mounting screw
(M5 short) (supplied)
3. Attach the cover onto the back of the monitor and
secure the tray.
Insert the tray into the tray mounting bracket and secure
with 2 M4 tray mounting screws (supplied).
Tray
(supplied)
M4 tray mounting screws
(supplied)
Screw removed in step 1
Screw removed in step 1
n
Removing the temporary stand
Caution
• Thetemporarystandisonlyforusewiththismonitor.Do
not use it for any other devices.
1. Spread a soft thick cloth (such as a blanket) on a
stable level surface on which the entire monitor can
be placed, and place the monitor on it with the screen
facing down.
2.Removethestandxingscrewsandthenremovethe
stand.
3. Attach the cover (supplied) onto the back of the
monitor.
Secure using 2 cover screws (M4 with washers) (supplied).
Cover screws
(M4 with washers)
(supplied)
Cover screws
(M4 with washers)
(supplied)
Ifatraywillnotbeattached,afxthecoverseal(supplied)
to the cover.
 previous next