Sharp PN-V600 Computer Monitor User Manual


 
4
E
MOUNTING PRECAUTIONS
• Thisproductisforuseindoors.
• AmountingbracketcompliantwithVESAspecicationsis
required.
• Sincethemonitorisheavy,consultyourdealerbefore
installing, removing or moving the monitor.
• Mountingthemonitoronthewallrequiresspecialexpertise
and the work must be performed by an authorized SHARP
dealer. You should never attempt to perform any of this
work yourself. Our company will bear no responsibility
for accidents or injuries caused by improper mounting or
mishandling.
• Usethemonitorperpendiculartoalevelsurface.If
necessary,themonitormaybetiltedupto20degrees
upward or downward.
• Whenmountingthemonitorhorizontally,theoptionalfan
cover(PN-ZR31)isrequired.Fordetailsalongwiththe
horizontal mounting conditions, consult your dealer.
• Thismonitorshouldbeusedatanambienttemperature
between32°F(0°C)and104°F(40°C).
• Becarefulofhightemperaturesinthesurroundingarea.
Wheninstallingthemonitorinsideahousing,orifthe
ambienttemperaturemaybeoutsideoftherangeof32ºF
(0ºC)to104ºF(40ºC),installafanortakeothermeasures
to keep the ambient temperature within the required range.
• Temperatureconditionmaychangewhenusingthemonitor
together with the optional equipments recommended by
SHARP. In such cases, please check the temperature
condition specified by the optional equipments.
• Donotblockanyventilationopenings.Ifthetemperature
inside the monitor rises, this could lead to a malfunction.
• Donotplacethemonitoronadevicewhichgeneratesheat.
• Adheretothefollowingwheninstallingthemonitorinits
portrait orientation. Failing to adhere to the following may
cause malfunctions.
-Toinstallinlandscapeorientation,rotatethemonitor90
degrees to the right.
-SettheMONITORontheSETUPmenutoPORTRAIT.
(See Operation manual.)
-Besuretosecurethepowercord(supplied)tothecable
clamp attachment with the supplied cable clamp.
Make sure that the power cord (supplied) does not supply
power to the terminal when being secured and do not
over bend the power cord (supplied).
Cable clamp
Power cord (Supplied)
Cable clamp
attachment
• Afterinstallingthemonitor,afxtheprotectioncovers
(4 pieces) as necessary.
Protection cover
Protection cover
If any component should be missing, please contact your dealer.
Liquid Crystal Display Monitor: 1
Cableclamp:2
Power cord: 1
CD-ROM(UtilityDiskforWindows):1
Setup manual (this manual): 1
Protection cover: 4
Handle screw (short): 4
Bezelsheet(long/short):2each
Bezelsheetattachmentinstructions:1
* Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
Supplied Components