Filter
Top Products
24
Adjusting the screen display (when using a digital signal)
MODE SELECT Menu
Notes:
- Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.
- To choose a menu option: SELECT button
- When adjustment complete:MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to the
left and right. (
buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved up
and down. (
buttons)
EXPAND (Screen expansion)
For display modes of less than 1280 X 1024 pixels,
the display can be expanded if desired. (
but-
tons)
OFF: Expansion off
ON1: Using the fixed aspect ratio,
the entire screen is enlarged.
ON2: The entire screen is enlarged.
Note:
- If a resolution of 1280 X 1024 pixels cannot be
achieved even after expansion is attempted, the
screen's perimeter will display black. (This is not
a malfunction.)
SCALING (Level of scaling)
If [EXPAND] is set on [ON1] or [ON2], the sharpness
of the image can be adjusted. (
buttons)
Note:
- If [EXPAND] is set on [OFF], [SCALING] cannot
be adjusted.
COLOR MODE
If this is set on [STD], the original color scheme of
the LCD monitor will be displayed. If this is set on
[sRGB], the colors of will be corrected according to
the computer image. (
buttons)
Note:
- To set [COLOR MODE] to [sRGB], set the
[WHITE BALANCE] to [STD].