Sharp UX-61 Fax Machine User Manual


 
1
Introduction
*Based on Sharp Standard No.1 Chart at standard resolution is Sharp special mode,
excluding time for protocol signals (i.e., ITU-T phase C time only).
Automatic dialling Rapid Key Dialling: 5 numbers
Speed Dialling: 35 numbers
Fax paper Initial starter roll (included with machine):
10 m
Replacement roll (not included):
FO-20PR 30 m (12.7 mm core)
Paper cutting method UX-21/UX-41/FO-11/FO-51: Tear off by hand
UX-61/FO-71/GQ-56: Automatic cutter
Memory size*
(UX-41/61 FO-51/71 GQ-56
Only)
448 KB (approx. 17 average pages)
Modem speed 9,600 bps with automatic fallback to lower
speeds.
Transmission time* Approx. 15 seconds
Resolution Horizontal: 8 pels/mm
Vertical:
Standard: 3.85 lines/mm
Fine /Halftone: 7.7 lines/mm
Super fine: 15.4 lines/mm
Automatic document
feeder
5 pages max. (A4, 80 g/m
2
paper)
Recording system Thermal recording
Halftone (grayscale) 64 levels
Compression scheme MR, MH, H2
Welcome, and thank you for
choosing a Sharp facsimile!
The features and
specifications of your new
Sharp fax are shown below.