Sharp XE-A217B Cash Register User Manual


  Open as PDF
of 136
 
126
■
Removing the receipt paper roll
When colored dye appears on the edges of the paper roll, it is time to replace the paper roll. Use paper of
57.5±0.5mminwidth.TopreventjammingbesuretousepaperspeciedbySHARP.
1.
ConrmthattheREGmodehasbeenselected.
2.
Remove the printer cover.
3.
Lift up the print roller arm.
4.
Remove the remaining paper roll from the paper roll cradle.
5.
Install a new paper roll correctly by following the steps in “Installing the Paper Roll”.
Print roller arm
■
Removing the Paper Jam
Caution: The paper cutter is mounted on the printer cover. Be careful not to cut yourself. Never
touch the printer head immediately after printing, as the head may still be hot.
1.
Remove the printer cover.
2.
Lift up the print roller arm.
3.
Remove the paper jam. Check for and remove any shreds of paper that may remain in the printer.
4.
Reset the paper roll correctly by following the steps in “Installing the Paper Roll.”
Print roller arm
 previous next