Filter
Top Products
20
UPC learning function
When you enter or scan a code which is not preprogrammed, you are required to enter its unit price and the
associated department. The UPC code, associated department and unit price entered are stored in the
UPC/EAN file and used for future UPC sales entries.
• When there is no capacity remaining in the file, the data is not stored in the file.
• The text of its associated department is applied to the entered UPC code.
• You can use the UPC learning function in the training mode. This may be convenient to practice
when installing a scanning system.
To use the UPC learning function, follow the procedure below:
For the repeat entry, use the
o
key.
Ä
500
£
A
“NO RECORD”
“PRICE -> DEPT”
are displayed.
Receipt printKey operation example
qd
D
Undifined
UPC code
Ä
Scan an undifined UPC code
“NO RECORD” is displayed and beep sound occurs three times.
Then, “PRICE -> DEPT” is displayed to guide you to enter unit price
and associated department code.
Unit price Department key
Department key
Dept. code
When entering “0”
To cancel the operation
In case associated dept. is dept. 1 through dept. 20
In case associated dept. is dept. 21 through dept. 40
In case associated dept. is 41 and above.
“ENTER DEPT#” is displayed.
o
l