Filter
Top Products
-14
Part Names and Functions
Projector (Rear View)
Using the Kensington Lock
• This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
Numbers in refer to the main pages in this operation manual where the topic is explained.
17
26
28
Remote control sensor
16
24
25
24
25
67
68
24
25
24
25
27
27
26
26
COMPUTER/COMPONENT 2
terminals
BNC terminals for computer
RGB and component signals
and audio input terminal.
WIRED REMOTE terminal
For connecting the remote control
to the projector when the signals
from the remote control cannot
reach the remote control sensor.
LAN terminal
Terminal for controlling the
projector using a computer
via network.
RS-232C terminal
Terminal for controlling the
projector using a computer.
S-VIDEO input terminals
Terminals for connecting video
equipment with an S-video
terminal and audio input terminal.
AC socket
Connect the supplied power cord.
Filter cover
(Intake vent)
Carrying handle
For carrying the projector.
HDMI terminal
Terminal for HDMI input.
DVI-D input terminals
Terminals for DVI digital
RGB and digital component
signals and audio input
terminal.
COMPUTER/COMPONENT1
input terminals
Terminals for computer RGB
and component signals and
audio input terminal.
MONITOR OUT terminals
∫
COMPUTER/COMPONENT
Output terminal for computer
RGB and component signals.
(Shared for COMPUTER/
COMPONENT 1 and 2 input.)
∫
AUDIO Output terminal.
(Shared for all inputs)
VIDEO input terminals
Terminals for connecting
video equipment and audio
input terminal.
Kensington Security
Standard connector
Terminals Refer to “Connecting the Projector to Other Equipment” on pages 24–26.