Filter
Top Products
48
Troubleshooting with the “Help” Menu
Utilizing the “Help” Menu
Functions
This function advises you to solve the problems during usage.
•You can adjust the items with check marks (✔).
• The items in the “Help” menu change, de-
pending on the input signal or setting that you
have selected.
• If the problem is not solved, refer to
“Troubleshooting” (see pages 63 and 64).
• When selecting “sRGB” in “Picture Mode”, the
item “Color is faded or poor” is not displayed.
This means you cannot change input signal
types.
Press O or Q to adjust.
If the image is not improved, se-
lect “Adjust horizontal noise”,
then press ENTER.
Select “Initiate “Auto Sync” Ad-
justments”, then press ENTER.
Press P or R to select “Vertical
stripes or flickering image ap-
pears” on Help menu, then press
ENTER.
Example: When image flickering appears
Operation to solve image flickering when pro-
jecting the computer RGB signal.
3
4
5
6
Note
Press MENU/HELP.
1
2
Press O or Q to select “Help”, then
press ENTER.
Adjustment buttons
(P/R/O/Q)
ENTER button
MENU/HELP
button
0Phase
SEL./ADJ. Rtn. Menu END
Help
If there is no change after performing "Auto Sync"
adjustments, adjust the following items.
Initiate “Auto Sync” Adjustments.
Vertical stripes or flickering image appear
Adjust vertical noise
Adjust horizontal noise
Reset the 2 items above
Return
Signal Info 1024✤✤✤✤768
H 48.3 kHz / V 59.9 Hz
SEL. ENTER END
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settings
SEL. ENTER END
Picture SCR - ADJ PRJ - ADJ Help
Help
Vertical stripes or flickering image appear
Press ENTER.