Filter
Top Products
30
Basic Operation
Adjusting the Picture
Adjusting the Colour Temperature
This function can be used to adjust the colour
temperature to suit the type of image input to the
projector (DVD, video, computer image, TV broadcast,
etc.).
This function can be operated using the CLR TEMP
buttons on the remote control, as well as the GUI menu
screen.
Adjusting the Colour Temperature with the
Remote Control
1 Press CLR TEMP (–/+) on the remote control.
Then, the present colour temperature level is
displayed.
2 Press CLR TEMP (–/+) to change the colour
temperature level.
• The descriptions of each of the button operations are
shown on the table below.
•“
” disappears after four-seconds of no-
operation.
Adjusting the Colour Temperature using the
GUI Menu Screen
Description of Colour Temperature
1 Press MENU. Menu bar and “Picture” menu
screen appear. GUI operation guide is also
displayed.
2 Press / to select “CLR Temp”.
3 Press / to move the mark of the colour
temperature setting to the desired setting.
4 To exit the GUI, press MENU.
Increases colour temperature for
cooler, bluish, florescent-like
images.
(High colour temperature)
Decreases colour temperature
for warmer, reddish,
incandescent-like images.
(Low colour temperature)
מ3 ם3
(Red) button button (Blue)
1,2
(GUI) On-screen Display
1,4
2,3
On-screen Display