Filter
Top Products
6
Important
Information
Outstanding Features
1. Wide DMD™*
1
(Digital Micromirror Device) Chip
The DMD Chip allows for a higher contrast image. Also, as it has an aspect ratio of 16:9, it is possible to
view, in the best possible picture frame, software recorded on 16:9 from DVD or DTV.
*
1
Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.
2. Full 720P Resolution
The high resolution panel of 921,600 pixels (1280 × 720 dots) allows for viewing high image quality just as
the original as well as HDTV 720P signals.
3. Low Fan Noise
A new optical engine has been developed for this product resulting in minimized fan noise for undisturbed
viewing.
4. For Use with DTV*
2
Allows projection of DTV images and 16:9 wide-screen images when connected to a DTV decoder or
similar video systems.
*
2
DTV is the umbrella term used to describe the new digital television system in the United States.
5. New Progressive Mode and Film Mode
Optimizes the image by converting the interlaced signal to the progressive. Useful for displaying slow-
moving images or still images. Three modes are available.
6. Advanced Video Circuitry
Provides high quality images with minimal dot crawl and cross colour noise.
7. Easy-to-use Graphical User Interface (GUI)
A multi-colour, icon-based menu system allows for simple image adjustments.
8. Colour Temperature Adjustment
The function can be used to adjust the colour temperature to suit the type of image input to the projector.
9. Gamma Correction Function
The gamma value setting can be adjusted according to the input source for optimal image contrast.
10. Brightness Switchover Function
Function with toggle switch to control the quantity of projected light. Select “NORMAL” or “BRIGHT” to
decrease or increase brightness, power consumption and fan noise.
11. Component Video Input
Utilizes a component video input signal (Y, CB, CR). The video signal is input as separate components to
provide superior colour and image quality.
12. Direct Computer Compatibility
A multi-scan RGB input accepts signals from VGA (640 dots × 480 lines) to SXGA (1,280 dots × 1,024
lines) and Macintosh (from 13" to 21") without the need for any additional hardware.