Configuration Commands
Rev 3.0B Feb.08 148
• n=1:Logclientevents(default)
• n=2:Logserverevents
• n=3:LogclientandServerevents
PinPoint (GPS)
ThisgroupincludescommandsspecifictoGPSfeaturesand
thePinPoint‐E
Figure 1-18: AceManager : PinPoint
DTRI=n
EnablemonitoringtheDTRsignalasininputevent.
• n=0:DisableDTRinputmonitoring.
• n=1:EnableDTRinputmonitoring.
Caution: If DTR is used as an input, DTR cannot be used for low-
power control.
GPSn
SendNMEAGPSstringsoutseriallink.ATGPS(noparameter)
willcausetheNMEAGGA,RMC,andVTGGPSstringsto
outputtotheserialportonetime.NotavailableinAceManager.