Filter
Top Products
Rev 1.0 Mar.04 17
44: Installation
• System Requirements
• Installation on Windows 98, Me, 2000 and XP
• Venturi Software Installation
• Card Insertion and Removal
This chapter guides you through the steps necessary to install the PC3320 card
on a notebook PC.
Note: Do not insert the PC3320 card into your PC Card slot before installing the
software.
The basic steps are:
1. Insert the PC3320 installation CD into your CD-ROM drive and install Mobile
Connection Manager.
2. Insert the PC3320 card into the PC Card slot (refer to page 20) to install the PC3320
card drivers.
3. Install the Venturi software from the installation CD (refer to page 19).
4. If the PC3320 card has not been pre-activated, use the Activation Wizard to configure
the PC3320 card (as described in “Activation” on page 21).
Before you begin the installation process, ensure your PC is running a supported
operating system and meets the hardware requirements described below.
System requirements
The PC3320 wireless network card is supported on:
• Windows 98 / 98 SE
• Windows Me
• Windows 2000 with Service Pack 1 or later (Service Pack 4 is recommended)
• Windows XP (Home and Professional versions)