Filter
Top Products
4
Hard ware Installation
Important: The USB 3.0 & 2.0 Hub with Gigabit
Ethernet and 5V/4A Adapter only works at USB
3.0 speed when connected to a USB 3.0 host
controller. Otherwise it will work as a USB 2.0 or
USB 1.1 hub when connected to USB 2.0 or USB
1.1 host controller, respectively.
1. Connect the Type-B connector of the
included USB 3.0 cable to the Upstream
port (Root Port, Type-B) of the USB 3.0 &
2.0 Hub with Gigabit Ethernet and 5V/4A
Adapter.
2. Connect the Switching power adapter into
the Power adapter jack of the hub, then
plug the power adapter into a reliable power
source.
3. Follow the instructions in the Driver
Installation section to install the driver.
4. After finishing driver installation, plug the
Type-A connector of the included USB 3.0
cable into an available USB port.
5. Restart the computer to complete the
installation.