Silex technology KX-CL400 Printer User Manual


 
Before You Start
10
Printer Panel
Button Operation
Button Operation
While Ready is displayed
on the LCD
, pressing this button will allow you to enter Menu mode.
In Menu mode, pressing this button exits Menu mode and Ready is displayed on the LCD.
When Processing or Printing is displayed in the upper line of the LCD, pressing this button will
allow you to pause printing.
While Pause printing is displayed on the LCD, pressing this button will allow you to resume printing.
Pressing this button displays the previous item of the same level menu.
Pressing this button decreases the numerical value one by one. Holding down this button will allow you
to scroll faster.
Pressing this button displays the next item of the same level menu.
Pressing this button increases the numerical value one by one. Holding down this button will allow you
to scroll faster.
Pressing this button advances to the lower level menu.
If a lower level menu does not exist, the action
will be ignored.
When performing the manual duplex printing function, after even pages are printed, odd pages are
printed by pressing this button.
When
LOAD Letter
or
Memory Overflow
, etc.
appears on the LCD, you can print the current job any-
how by pressing this button. However, the print may not be proper.
Pressing this button advances to the upper level menu. If an upper level menu does not exist, the
action will be ignored.
While the printer prints, pressing this button will allow you to stop printing or cancel processing the
current job.
Pressing this button advances to the lower level menu.
The selection is activated by pressing this button if the lower level menu does not exist.
When the life of an Accumulator Unit, Fuser Unit or Transfer Roller is worn out in the middle of
printing, hold down this button more than 3 seconds after replacing the component.
The remaining life is reset and the replacement error will be cleared.