Filter
Top Products
Si2493/57/34/15/04
Global ISOmodem-EVB
Rev. 0.6 11
Table 4. Voice Commands
AT Commands Purposes
AT:U71,11 Configure modem to send/receive data in linear mode to/from Si3000
interface
AT*Y254:W0059,7785 Enable Si2457 modem TDMA’s interface by setting LSBit of memory
0x0059
AT*Y254:W004B,011C Write to Si3000 Control Reg1: Line Driver, Handset Driver, and Micro-
phone Bias Normal Operations are enabled.
AT*Y254:W004B,0200 Write to Si3000 Control Reg2: HPF enabled, PLL divided by 5, Digital
Loopback Off
AT*Y254:W004B,0300 Write to Si3000 Control Reg3: PLL Divider N1
AT*Y254:W004B,0400 Write to Si3000 Control Reg4: PLL Divider M1
AT*Y254:W004B,055A Write to Si3000 Control Reg5: Line-In, Mic-In, Handset-In, FIR are acti-
vated.
AT*Y254:W004B,067F Write to Si3000 Control Reg6: Line-Out, Handset-Out are activated.
AT*Y254:W004B,075F Write to Si3000 Control Reg7: SPKR_L, SPLR_R are activated.
ATH1 Off-hook command for calling
AT.1 Dial individual number 1
AT.0 Dial individual number 0
AT.4 Dial individual number 4 and wait for answer