Singer 6500 Series Network Card User Manual


 
Congratulations! You have
completed the installation of
your SpeedStream
®
device.
Step 3
>
PC Conguration Procedures
Windows Configuration
In order to setup the SpeedStream
®
device,
your PC must rst be congured to obtain
an IP address from a DHCP server. Follow the
procedure below:
Note: The following procedures cover conguration of a PC
running Windows
®
XP. Please refer to the User Guide on the
CD-ROM for help conguring other operating systems.
1. Click Start > Control Panel.
2. Double-click the Network
Connections icon.
3. Double-click your Network Card.
4. Click Properties.
5. Select Internet Protocol (TCP/IP).
6. Click Properties.
7. Select Obtain an IP address
automatically.
8. Select Obtain DNS server address
automatically.
9. Click OK and exit out of the Control Panel.
10. Congure Internet Access using the
procedure that follows.
Internet Access
Next, make sure your PC will use the
SpeedStream
®
device (and not Dial-Up
Networking) when connecting to the
Internet. Follow the procedure below:
1. Click Start > Control Panel.
2. Double-click the Internet Options icon.
3. Click the Connections tab.
4. Click Setup.
5. Click Next
.
6. Click Connect to the Internet
.
7. Click Next
.
8. Click Setup my connection manually
.
9. Click Next
.
10. Select Connect using a broadband
connection that is always on
.
11. Click Next
.
12. Click Finish
.
13. Congure the Gateway using the
Gateway Conguration procedure
that follows.
Congure the Gateway
Windows Me and XP users: If you have
Universal Plug and Play (UPnP) enabled,
Windows may detect the SpeedStream
®
device upon startup and provide a Shortcut
to the device on the desktop or system task
tray. The icon will be labeled as “Residential
Gateway.” Double-click the icon and skip
to step 3.
1. Start your Web browser. In the Address box,
enter the following: http://speedstream.
2. Press Enter. The SpeedStream
®
Simple Setup
Wizard will launch.
3. At the end of the Setup Wizard, you will be
given the option to either connect to
the Internet or further congure the optional
settings of the gateway.
4. If additional conguration is desired, select
the icon for the service or option
you wish to congure: the gateway’s rewall
and security settings, User Proles and
content ltering, or home network options.
For non-standard congurations or troubleshooting procedures,
consult the User Guide on CD-ROM.
6
7