Singer 6500 Series Network Card User Manual


  Open as PDF
of 8
 
Macintosh Configuration
In order to setup the SpeedStream
®
device, your computer must rst be congured to obtain
an IP address from a DHCP server.
7
Follow the procedure below for OSX:
1. Click Apple -> System Preferences.
2. Select the Network icon under the
Internet & Network section.
3. Select Built-in Ethernet from the
Show drop-down menu.
4. Select Using DHCP Server from the
Congure IPv4 drop-down menu.
5. Click Apply Now and exit out of
System Preferences window.
6. Congure the Gateway using the
Gateway Conguration procedure
that follows.
Follow the procedure below for OS9:
1. Click Apple -> Control Panels -> TCP/IP.
2. Select Ethernet from Connect via
drop-down menu.
3. Select Using DHCP Server from the
Congure drop-down menu.
4. Close window and save changes.
5. Congure the Gateway using the
Gateway Conguration procedure
that follows.
Congure the Gateway
If your PC has not been connected to a
broadband modem or other network device,
you will need to perform the PC conguration
procedure below. Remember to restart each
PC when nished.
1. Start your Web browser. In the Address box,
enter the following: http://speedstream.
2. Press Enter. The SpeedStream
®
Simple
Setup Wizard will launch.
3. At the end of the Setup Wizard, you will
be given the option to either connect to
the Internet or further congure the
optional settings of the gateway.
4. If additional conguration is desired,
select the icon for the service or option
you wish to congure: the gateway’s rewall
and security settings, User Proles and
content ltering, or home network options.
For non-standard congurations or troubleshooting procedures,
consult the User Guide on CD-ROM.
Macintosh Conguration Procedures
Congratulations! You have
completed the installation of
your SpeedStream
®
device.
 previous