Smart Technologies 2000i Projector Accessories User Manual


  Open as PDF
of 15
 
10 Projector Replacement Guide for the 2000i 99-00496-00 REV A0
To move the image up or down
1. Crouch down in front of the screen.
2. Look underneath the pen tray and locate the Electronics Tray. Locate a plastic cap on the
right side of the Electronics Tray.
Electronics Tray
3. Remove the plastic cap to reveal an access hole.
4. Use the supplied 7/16" nut driver to loosen and tighten the bolt inside the access hole. This
action adjusts the vertical position of the image on the screen. Adjust accordingly.
Move Image Up or Down
 previous