Filter
Top Products
4 Projector Replacement Guide for the 2000i 99-00496-00 REV A0
8. Slide the projector plate back into place by maneuvering the screws through the cabinet
slots. With a partner supporting the bottom of the projector, use the provided 7/16" nut
driver to secure the projector plate in place using the nuts and washers that you removed
in step 5. Place the single nylon washer between the steel washer and the cabinet (see
illustration). Also make sure that the spring and shoulder washers remain in place on the
long screw.
Spring and Shoulder
Washers
Steel Washer
Nylon Washer
Long Screw