Filter
Top Products
12
Contents
Chapter 3 — Hardware Setup
off on on off on on 28
off on on on off off 29
off off on on off on 30
off on on on on off 31
off on on on on on 32
on off off off off off 33
on off off off off on 34
on off off off on off 35
on off off off on on 36
on off off on off off 37
on off off on off on 38
on off off on on off 39
on off off on on on 40
on off on off off off 41
on off on off off on 42
on off on off on off 43
on off on off on on 44
on off on on off off 45
on off on on off on 46
on off on on on off 47
on off on on on on 48
on on off off off off 49
on on off off off on 50
on on off off on off 51
on on off off on on 52
on on off on off off 53
on on off on off on 54
on on off on on off 55
on on off on on on 56
on on on off off off 57
on on on off off on 58
on on on off on off 59
on on on off on on 60
on on on on off off 61
on off on on off on 62
on on on on on off 63
on on on on on on 64
Switch SW 2
Function
Fault on
Loss of
Modbus
Plus
When enabled, the
1560-MBP will fault the
connected SCANport
device if the Control
Word is not updated
within 10 seconds.
Note that the fault is not
enabled until after
Modbus Plus
communications have
been initially
established.
Details
Description
SW2-8
Off = Disable fault on loss
of Modbus Plus
On = Enable fault on loss of
Modbus Plus