![](http://pdfasset.owneriq.net/9/3f/93f5ea9b-44e8-4f83-b1df-552c0496164e/93f5ea9b-44e8-4f83-b1df-552c0496164e-bg45.png)
Advanced Setup
61
Tools - Reset
Click APPLY to reset the Barricade Router. The reset will be
complete when the power LED stops blinking.
Note: If you use the Reset button on the front panel, the
Barricade Router performs a power reset. If the button
is held depressed for over five seconds, all the LEDs
will illuminate and the factory settings will be restored.
Status
The Status screen displays WAN/LAN connection status,
firmware, and hardware version numbers, illegal attempts to
access your network, as well as information on DHCP clients
connected to your network.