![](http://pdfasset.owneriq.net/9/3f/93f5ea9b-44e8-4f83-b1df-552c0496164e/93f5ea9b-44e8-4f83-b1df-552c0496164e-bg53.png)
Configure the Print Server
75
14. In the Configure Standard TCP/IP Port Monitor dialog box you
will need to configure some additional settings. Please
confirm these settings below:
• Port Name: IP_192.168.2.1*
• Printer Name or IP Address: 192.168.2.1*
* This should be the same information that was configured in
Step 7.
• In the Protocol section click on the LPR option
• The Raw Settings section should be grayed out
• The LPR Settings section should have the Queue Name set to
one of 2 options depending on the version of Barricade you
are using.