![](http://pdfasset.owneriq.net/9/3f/93f5ea9b-44e8-4f83-b1df-552c0496164e/93f5ea9b-44e8-4f83-b1df-552c0496164e-bg5d.png)
Troubleshooting
85
3. Then type ipconfig/renew.
Symptom
The 10/100 LED does not light after a connection is made.
Possible Solutions
• Check that the host computer and hub are both powered on.
• Be sure the network cable is connected to both devices.
• Verify that Category 5 cable is used if you are operating at
100 Mbps, and that the length of any cable does not exceed
100 m (328 ft).