Filter
Top Products
7
Section 1 | Getting Started
Site Location
Choose a location for your EZ Connect Turbo Wireless Access
Point. Usually, the best location is at the center of your wireless
coverage area.
Connect the Ethernet cable
The EZ Connect Turbo Wireless Access Point should be connect-
ed to a network switch or hub that is connected to a DHCP serv-
er, or connected to a Barricade Broadband Router. Use a stan-
dard Category 5 UTP Ethernet cable with an RJ-45 connector to
connect the Access Point to one of router, hub, or switch.
Connect the power cable
Connect the power adapter cable to the 5V DC power socket on
the rear panel.
Warning: Use only the power adapter supplied with the
SMC2455W. Using another power adapter will cause
damage to the unit and void the warranty.
Antennas
LED Indicator lights:
•Power
•Wireless Transmit/Receiver
•Ethernet Link/Activity