SMC Networks SMC2455W Network Router User Manual


 
1.1 | EZ Connect Turbo 11/22 Mbps Wireless Access
Point LED Indicators
The preceding diagram shows the LED indicator lights on the
EZ Connect Turbo Wireless Access Point.The EZ Connect Turbo
Wireless Access Point has 2 external antennas, which are
adjustable for best wireless reception.
The front of the Wireless Access Point has 3 labeled indicator
lights.When you connect your Access Point to your network,
these lights will be on, off, or blinking, indicating the following
states.
1.2 | Resetting the SMC2455W EZ Connect Turbo
11/22 Mbps Wireless Access Point
To correct temporary connectivity problems, the SMC2455W
Wireless Access Point can be reset by the following methods:
•The physical reset button on the back of the unit.
•You can reset the unit or reset the unit to factory defaults
using the Web-based Utility.
Using the Reset button on the back of the SMC2455W
1. Locate the [Reset] button on the back of the Access Point.
2. Unplug the power from the back of the Access Point for
5 seconds.
Light On Off Blinkin
Ethernet Ethernet Connection No Ethernet Data being sent or
Connection received over
Ethernet connection
Wireless Wireless Connection No Wireless Data being sent or
Connection received over
wireless connection
Power/Status Receiving Power Not Receiving N/A
Power
8