Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-138
• readview - Defines the view for read access. (1-64 characters)
• writeview - Defines the view for write access. (1-64 characters)
• notifyview - Defines the view for notifications. (1-64 characters)
Default Setting
• Default groups: public
3
(read only), private
4
(read/write)
• readview - Every object belonging to the Internet OID space (1.3.6.1).
• writeview - Nothing is defined.
• notifyview - Nothing is defined.
Command Mode
Global Configuration
Command Usage
• A group sets the access policy for the assigned users.
• When authentication is selected, the MD5 or SHA algorithm is used
as specified in the snmp-server user command.
• When privacy is selected, the DES 56-bit algorithm is used for data
encryption
• For additional information on the notification messages supported by
this switch, see “Supported Notification Messages” on page 3-61.
Also, note that the authentication, link-up and link-down messages are
legacy traps and must therefore be enabled in conjunction with the
snmp-server enable traps command (page 4-132).
Example
show snmp group
Four default groups are provided – SNMPv1 read-only access and read/
write access, and SNMPv2c read-only access and read/write access.
Command Mode
Privileged Exec
3. No view is defined.
4. Maps to the defaultview.
Console(config)#snmp-server group r&d v3 auth write daily
Console(config)#