Filter
Top Products
4
Hardware Features
Status Indicator LED
The scanner has a tri-color LED to indicate different states.
LED LED Activity Meaning
1 blink per second
Less than 20% of battery life
remaining.
Solid red Batteries are charging.
Battery
Status
(Red)
Off when connected
to charger
Batteries are fully charged.
1 blink per second
Bluetooth radio is on, but not
connected.
Bluetooth
Status
(Blue)
1 blink per 5 seconds
Bluetooth radio is on, connection
established.
Good Read
(Green)
Green
Data successfully scanned and
transmitted to host device.
Status Indicator Beeps
The scanner beeps to signal the Bluetooth connection status. Optionally,
you can also set the scanner to beep every time it successfully scans data
and transmits it to the host device.
LED Beep Pattern Meaning
1 beep Scanner connected to host device.
Bluetooth
Status
(Blue)
2 beeps Scanner disconnected from host device.
Good Read
(Green)
1 beep
Data successfully scanned and
transmitted to host device.
Rechargeable Battery and AC Adapter
Recharge the internal battery by using the included AC adapter. The adapter
rating is 5V, 2A, positive pole center. A fully charged battery should
provide roughly 8 hours of normal operation. AC and DC adapters of most
recent Pocket PCs from Casio, Compaq, Dell, Fujitsu, and Toshiba are also
compatible.
WARNING: Charge ONLY NiMH batteries in the CHS. Damage may
result if other battery types are charged. Do not store the CHS for over 30
days with the batteries installed