Filter
Top Products
33
To connect the camera to a specific access point on the
network, please make sure to set the SSID of the
camera to correspond with the access point’s SSID for
communication. Type any string up to 32 characters
long (spaces, symbols, and punctuation are not
allowed) in the Network Name box.
To connect the camera to an Ad-Hoc wireless
workgroup, make sure to set the same wireless channel
and SSID to match with the PC/Notebook’s
configuration for direct wireless communication.
•
Wireless Channel: This pull-down menu provides the
wireless channel for communication. A "channel" is a
range of frequencies to be used in communication
between the camera and access point in Infrastructure
mode, or the camera and PC/Notebook in Ad-Hoc
mode. Select the appropriate channel from the list
provided depending on the regulatory region where the
unit is sold. The default setting is at channel 11.
• Transmission Rate: Select the data transmit rate from
this pull-down menu. The default setting is Fully
Automatic.
- WEP Encryption
• WEP Encryption: Wireless network communications
can be intercepted easily. WEP (Wired Equivalent
Privacy) is an encryption method specified by the
IEEE 802.11g standard to make any intercepted
communications extremely difficult to interpret by
unauthorized parties.
The default setting for this
option is Disable.
• WEP Key Format: To enable WEP Encryption, you
should decide the encryption format first by selecting