Filter
Top Products
5
Next select the ‘Network’ tab.
In the ‘Local Networks’ section, select the radio button next to ‘Choose local network from list’ and select "LAN Primary
Subnet" from the dropdown box.
In the ‘Destination Networks’ section, select the radio button next to ‘Choose destination network from list’ and select
"checkpoint_group" from the dropdown box.
Next select the ‘Proposals’ tab. The default values should be correct, except the ‘Life Time’; normally "28800" should be
lowered to "3600" in both Phase 1 and 2 proposals. Verify that all values are correct.